WARN’s STUNNING Ascent Bumpers

So you’re aiming to add a winch to your truck, and you know you want it branded with that big red “W”.  Whether you’ll be putting that geartrain to the test or never even put it into ‘free spool’, we won’t ask.  Whatever your winch needs may be, chances are your stock bumper doesn’t come equipped to accommodate one straight from the lot.  There are some solutions with a smaller footprint, but let’s face it, this is a perfect excuse to get that flimsy plastic bumper outta there and swap it with some metal.  But now comes the tricky part.  Selecting a bumper that ticks all the boxes can be confusing.  Tight fit?  Easy bolt-on installation?  Light mounting?  Sensor compatibility?  And most importantly, will it fit my winch?  Few things are worse in the truck aftermarket than getting a new bumper installed only to realize your expensive winch won’t clear the cutout area.  Well, there’s a simple solution!  Why not get a bumper from the company that makes your winch?  Warn’s Ascent Bumpers look great, fit snugly, and easily house your Warn winch!

While you first and foremost think of Warn as a winch company, their Ascent line of bumpers should shift your thinking.  They combine low-profile styling with high-performance off-road features you demand in a bumper.

WARN ASCENT FRONT BUMPER

• Angled design sits high, to maintain maximum ground clearance and approach angles
• Winch ready – accepts most WARN mid-frame (footdown) winches up to 12,000 pounds: ZEON and ZEON Platinum, 9.5cti, 9.5 xp, XD9000i, XD9000, M8000, and VR winches.
• Bumper features integrated dual light ports to mount auxiliary flood or spot lights
• Welded recovery points, ready for D-shackles (sold separately)
• All Ascent front bumpers (with exception to Raptor) has provisions to mount modular pre-runner Baja tubes
• Durable black textured powder coat over 11-gauge steel withstands rigorous salt spray testing
• Bumper accommodates oversize tires
• Easy to install – Pre-drilled bolt holes and cutouts make it easy to mount a WARN winch, even after bumper install
• No need to remove front bumper during winch install or removal
  

WARN ASCENT REAR BUMPER

• Rear Bumper features angled design that sits high, maintaining maximum ground clearance and approach angles
• Bumper features integrated light ports to mount auxiliary flood or spot lights
• Rear bumper has corner steps for easy access to truck bed and is parking sensor compatible
• Durable black textured powder coat over 11-gauge steel withstands rigorous salt spray testing, delivering up to maximum corrosion protection
• Bumper accommodates oversize tires
  All Ascent Rear bumpers retain use of factory license plate lights, rear camera, towing and trailer plugs, power ports, and receiver hitch
• Built-in heavy-duty corner steps
• All Ascent bumpers are compatible with the following sensors:
  – Parking proximity sensors (Front and Rear)
  – Lane departure warning
  – Airbag
  – Blindspot sensing
  – Camera vision systems